12V 6A Smart Battery Charger | With Pulse Repair and LCD Display | For AGM, Gel, and Deep Cycle Batteries

12V 6A Smart Battery Charger | With Pulse Repair and LCD Display | For AGM, Gel, and Deep Cycle Batteries

12V 6A Smart Charger: Charging, Maintenance and Repair with Visual Precision

Keep your 12V batteries healthy and extending their lifespan with the EAFC 6A Smart Charger . This microprocessor-controlled device goes beyond simple recharging: it incorporates a pulse repair (desulfation) system to recover aging batteries and a clear LCD display that shows voltage, current, temperature, and charge status in real time. Fully automatic and safe, it is ideal for deep cycle, AGM, GEL, and traditional lead-acid batteries.

Technology that takes care of your battery:

• Pulse Repair Function (Desulfation): The special "Repair" function emits controlled electrical pulses to dissolve sulfate crystals on the battery plates, a major cause of failure in lead-acid batteries. It can revive sulfated batteries and significantly extend their lifespan.
• Full Monitoring via LCD Display: Unlike chargers with only LEDs, the LCD provides precise information: Battery voltage, charging current, temperature, and charge level (in %) . You see exactly what's happening.
• Intelligent and Automatic 5+1 Charging Stages: The microprocessor automatically manages the charging stages (test, main charge, absorption, test, float) and finishes with a "float" stage after displaying "FUL", keeping the battery 100% charged without overcharging. It automatically shuts off (OFF).
• Extended Compatibility: Designed for the most common modern batteries: AGM (Absorbent Glass Mat), GEL, Lead-Acid (WET/Flooded), Calcium, and EFB . Supports batteries from 4Ah to 100Ah (motorcycles, some cars, and solar systems).
• Integrated Professional Safety: Features 7 protections (reverse polarity, short circuit, no battery, overvoltage, overheating, etc.) and fan cooling for stable operation.

Simple Instructions for Use (Step by Step):

1. Connect the clips ( Red to positive+, Black to negative- ). The display will light up.
2. Plug it in. The fan will turn on and charging will begin automatically.
3. To activate REPAIR mode , press the "Mode" button 4 times until the icon flashes.
4. When the display shows "FUL" and 100% , leave it connected for 1-2 hours for the final float charge stage. Only disconnect when it shows "OFF" .

Technical Specifications:

• Output Voltage: 12V DC.
• Output Current: 6A.
• Input Voltage: Automatic Dual Voltage (110-220V AC, 50/60Hz).
• Battery Range: 12V, 4Ah up to 100Ah .
• Compatibility: AGM, GEL, WET, Calcium, EFB, Lead-Acid.
• Special Features: LCD Display, Pulse Repair Mode, 5+1 Automatic Stages.
• Protections: Reverse Polarity, Short Circuit, Overvoltage, Overheating (>65°C).
• Dimensions: Compact (150 x 85 x 62 mm).

Important Notices:

• For indoor use only , protected from rain.
• Do not transport the charger while the vehicle is running (to avoid vibrations).
• Confirm that your battery capacity (Ah) is between 4Ah and 100Ah .

Ideal for: Motorcycle owners, car owners with smaller batteries, recreational vehicles (RVs), solar power systems with deep cycle batteries, boat owners , and anyone who wants to maintain and recoup their investment in good batteries.

Invest in your battery's health. Buy intelligence, precision, and longevity.